Removing/Replacing Trigger For most operation and maintenance the trigger does not need removal. The screws have Loctite to prevent the adjustment from slipping, so a firm steady pressure is needed for the adjustment. To adjust the screws insert a hex key and turn the screw. The bottom screw is for trigger post-travel and the top screw adjusts the activation point (where the marker fires). Attach your compressed air tank by screwing it into the ASA.Īdjusting the Trigger The Victory trigger has two adjustment screws. Make sure the ASA (Air Source Adapter) is in the off position by turning the chrome cam drive knob on the bottom of the ASA. If using an adjustable-output air system, set the system’s output to between 450 and 550 psi. Use of a low pressure compressed air system is recommended with each Bob Long marker. Quick Start Installing Air Tank Much like any other tournament marker, the Victory requires the use of compressed air or nitrogen only. Eye protection designed specifically for Paintball must be worn by user and any other persons within 200 yards (183 meters) of this Marker. Misuse may cause serious injury or death. 20 WARNING This Paintball Marker is not a toy.
01/10 BOB LONG TECHNOLOGIES Mokelumne Hill, CA ĬONTENTS Contents.
0 kommentar(er)
